Current sensor CPE
CPE current sensors are used in automatics systems of combined cutter loaders and conveyors in underground parts of mines as:
- bistable sensors of set value current (can be used as an OPERATION - STOPPAGE indicator in AC devices), can co-operate with NK transmitter of TK-CTT-32 transmission system or NKTm-u in FOD-900 transmission system.
- analogue AC value gauge, possible co-operation with AT2 module of VAL operator's system.
| Item | |
external dimensions |
mm |
supply voltage (except*) terminals [12V-0V] |
V |
Output voltage in analogue operation, terminals (AO-0V) |
V |
output voltage in bistable (three-conductor) operation, terminals (DO-0V) |
V |
Outlet voltage in bistable (three-conductor) operation, terminals (IND-0V) |
- |
maxumum current consumtion |
- |
current measurement range |
A |
Category of spark-safe circuits that co-operate with the appliance |
- |
Permissible diameters of measured current conductors that can be clamped in clamping devices |
mm |
range of permissible diameters of measured current conductors |
mm |
cable glands |
- |
permissible diameters of conductors |
mm |
Weight |
kg |
degree of protection of enclosure |
- |
catalogue number |
- |
| Item | CPE | |
external dimensions |
mm |
250 x 170 x 115 |
supply voltage (except*) terminals [12V-0V] |
V |
spark-safe 12V (5%) |
Output voltage in analogue operation, terminals (AO-0V) |
V |
0,4÷5V or 0,4÷2V (for VAL stations) |
output voltage in bistable (three-conductor) operation, terminals (DO-0V) |
V |
≤0,5V: STOPPAGE Uz–0,7V: OPERATION |
Outlet voltage in bistable (three-conductor) operation, terminals (IND-0V) |
- |
in OPERATION the lower half of rectangular voltage cut off, in STOPPAGE rectangular voltage unaltered |
maxumum current consumtion |
- |
Analogue operation = 5,5 mA, bistable operation = 180μA |
current measurement range |
A |
from 40 |
Category of spark-safe circuits that co-operate with the appliance |
- |
Ia |
Permissible diameters of measured current conductors that can be clamped in clamping devices |
mm |
54 ÷ 65 |
range of permissible diameters of measured current conductors |
mm |
10 ÷ 75 |
cable glands |
- |
WP 13,5; 2 pieces |
permissible diameters of conductors |
mm |
7 ÷ 13 |
Weight |
kg |
2,5 |
degree of protection of enclosure |
- |
IP54 |
catalogue number |
- |
AM-930321-01 |
* bistable two-conductor operation - uses only [IND-0V] terminals and supplies them with rectangular voltage signal of ±5...7,5V. The upper half of the voltage supplies the CPE system, and the lower half is connected to -0,6V voltage in OPERATION mode.
** ATTENTION: for conductors with external diameter > 65) mm, it is necessary to unscrew four M6x16 screws and remove clamping devices
| |
Apator Mining Sp. z o.o.
Al. Roździeńskiego 188
40-203 Katowice, Poland
Head of Sales Department
Al. Roździeńskiego 188 40-203 Katowicefax +48 (32) 259-68-62Name:Krzysztof Skroch Function:Head of Sales Department Phone:+48 32 784 23 63 Mobile phone:+48 506 009 190 Fax:+48 32 259 68 62 |
Name:Marek Barbach Function:Sales Department Manager Phone:+48 32 784 23 62 Mobile phone:+48 507 129 151 |
Name:Jakub Smołka Phone:+48 32 784 23 57 Mobile phone:+48 507 129 151 |
Name:Korneliusz Kuczera Phone:+48 32 784 23 64 Mobile phone:+48 500 002 676 |