PBS 3

  • option of fuse link state indication by neon indicator tube
  • labelling area on bus bar terminals acces covers
  • labelling clip
  • bottom terminal shroud labelling area

Technical data

Item
fuse-base size
-
Rated thermal current Ith
A
Rated voltage Un
V
Rated insulation voltage Ui
V
Rated frequency
Hz
rated power dissipation
W
peak current
kA
Mechanical durability
-
weight
kg
Protection degree
IP
Size of fuse links
-
Item PBS 3
fuse-base size
-
3
Rated thermal current Ith
A
630
Rated voltage Un
V
690
Rated insulation voltage Ui
V
1000
Rated frequency
Hz
50-60
rated power dissipation
W
60
peak current
kA
100
Mechanical durability
-
1000
weight
kg
5,00
Protection degree
IP
20*
Size of fuse links
-
3
* with fuse link shrouds

Construction

Silver plated contacts provide low power loss. Depending on clamp type,
PBS fuse bases enable user to connect circular or sector-shaped cables or cables with lug terminals. PBS fuse bases of size 1-3 could be equipped with additional fuse link shrouds providing protection degree of IP20. Additionally offered adapters enable to install PBS fuse bases of different sizes on common bus bar system.

Application

PBS fuse bases are designed for the distribution of electricity and protection against short circuits and overloads in three phase alternative current circuits with maximum operating voltage of 690 V. They are intended for direct installation on horizontal or vertical bus bar system. Due to their modern and compact design installing is easy and gives much saving of space in substations and distribution boards. Each type is suitable for top cable terminal connection when installed on horizontal bus bar system. Removal of the fuse link provides clearly noticeable, large isolating distance in the circuit. Easy installation of earthing devices is another advantage.

 

Operating conditions

  • to be installed in the room free of any dust, aggressive or explosive gases
  • altitude up to 2000 meters above sea level
  • outdoor - in cabinets with protection degree > IP 34
  • ambient temperature from -25°C to +55°C - but in case of use of disconnectors in temperature from +41°C to +45°C current value Ith should be reduced by 5% and within temperature range of +46°C to +55°C current value Ith should be reduced by 10% ,
  • relative humidity of the air should not be higher than 50% at temperature of +40°C

Versions

Version
 Designation Part number
PBS 3/630 A V-shaped cable terminal, 3 x V-terminal clamp (70 - 300 SW) PBS 3-V 63-811639-021
PBS 3/630 A V-shaped cable terminal, 3 x V-terminal clamp (70 - 300 SW) , 3 x fuse link shroud PBS 3-V-O 63-811720-021
PBS 3/630 A A M12 screw terminal, 3 x M12 screw PBS 3-M 63-811639-041
PBS 3/630 A M12 screw terminal, 3 x M12 screw, 3 x fuse link shroud PBS 3-M-O 63-811720-041
PBS 3/630 A V-shaped cable terminal, 3 x double V-terminal clamp (2 x 50 - 240 mm2) PBS 3-2V 63-811639-061
PBS 3/630 A V-shaped cable terminal, 3 x double V-terminal clamp (2 x 50 - 240 mm2), 3 x fuse link shroud PBS 3-2V-O non-standard
PBS 3/630 A left side bus bar terminal PBS 3-NL 63-811673-021
PBS 3/630 A left side bus bar terminal, 3 x fuse link shroud PBS 3-NL-O non-standard
PBS 3/630 A right side bus bar terminal PBS 3-NR 63-811673-041
PBS 3/630 A right side bus bar terminal, 3 x fuse link shroud PBS 3-NR-O non-standard

 

PBS 3-V

 

    
 
PBS 3-V-O

 


 
 
PBS with double V-terminal clamps  - 2 x 240 mm2

   

 

PBS with lateral bus bar terminal

 


   

 

Clamps

Designation   PBS 3-V (630 A)
PBS 3-M (630 A)
 PBS 3-2V (630 A)  PBS 3-NL/NR
Clamp
 V-terminal clamp 70-300 SW M12 screw terminal  HS 2/50-240 M12 screw
Picture of clamp
 
 
 
 
Cross-section of cable
conductors
V-terminal clamp to direct fixing of conductor
with bare end with cross-section:
 cable terminal
V-terminal clamp to direct fixing of two conductors
with bare end with cross-sections:

lateral bus bar terminal:

left/right
side

  -
50-
120mm2
  -
  70 - 150mm2 
 -
35-
150mm2
   -
35 - 185mm2 
  -
70 -
240 mm2
  -
95 -
300 mm2
  -
50 -
185 mm2
   -
50 -
240 mm2
Tightening torque  30 Nm 56 Nm   40 Nm  56 Nm
Bus bars of maximum width of 40 mm and maximum thickness of 8 mm can be fixed to M type screw clamps when protective barrier between phases is applied.

Trade contact

Apator S.A.

 

ul. Żółkiewskiego 21/29,
87-100 Toruń, Poland

Foreign Trade Department Switchgear Equipment

Name:Rafał Kamiński
Function:Area Sales Manager
Phone:+48 (56) 6191 627
Mobile phone:+48 506 009 338
Information:
Central Europe, The Balkans, Turkey (English)
Name:Michael Roclawski
Function:Area Sales Manager
Phone:+48 (56) 6191 492
Mobile phone:+48 506 009 339
Information:
Germany, Austria, Switzerland, Western Europe, Asia, Africa (German)
Name:Grzegorz Błaszkiewicz
Function:Logistics (Russian)
Phone:+48 (56) 6191 316
Mobile phone:+48 506 009 374

Related products:

Copyright © 2009-2010 Apator SA. All rights reserved.Created by VOBACOM